How to "head cleaning" on printers Brother DCP-J140W

Follow the steps below to make a cleaning of injectors for the Brother DCP-J140W printer, if you have any other questions, type a comment.

We need to clean the head of the Brother DCP-J140W printers, when pages have streaks, points average or blurry.
The head cleaning, works with ink cartridges have, so it is recommended that you seek every alternative to not get to use this tool, as it will lose much of the ink cartridges are each cleaning.

You must have the printer working properly - any error related to the cartridges - if you have any questions, just write a comment, gladly it is answered.

printer Brother DCP-J140W

Procedure for verifying the injectors

In the main display, located in the front of the printer we will press the combination of buttons described below: (this is to check what is the quality and printing or the cartridge is presenting problems)

• We press the menu button
• Then navigate on the arrow up or down to get where said ink may appear select OK maintenance ink (ink - English)
• Then we pressed print test press OK
• Selected color and started (get a page and verify the quality)
• Based on the results we made cleaning head

Procedure for cleaning head

• Press menu
• We use the navigation buttons up or down to get where said ink or ink maintenance - pressed ok
• We use the navigation buttons up or down to get where said test print — pressed ok
• Use the navigation buttons up or down to get where said alignment — pressed ok
• Here you can select whether to maintain the black or tricolor cartridge, by following the selection we have chosen for the quality of the nozzle check pressed start

If the printer has its touch screen

• Find ink option by pressing the left and right buttons — do ok
• After being in ink, you press up or down to get to print test (selected)
• Then alignment
• Finally select if you want color or black alignment and press (start)

Remember if you have any questions, do it, gladly be answered. Write a comment below.