Follow the steps below and learn how to refill ink cartridges PG-510 / PG-510XL Canon printers.
Canon cartridge PG-510 ink capacity of 220 — A4 pages sizes normal —, pigmented ink, they are one of the best cartridges in the market for quality documents.
Compatible with Canon PIXMA printers:
iP2700, 2702, MP240, MP250, MP252, MP260, MP270, MP272, MP280, MP282, MP490, MP492, MP495, MP499, MX320, MX330, MX340, MX350, MX360, MX410, MX420
On the American continent would cartridges Canon PG-210 ink, so use the same procedure to fill.
We need a syringe, pigmented black ink (if you can not get this OK), an area where you can put a cartridge and there is no problem spilling some ink, a little patience and napkins to wipe up any spills.
pg canon ink cartridges for sale by 1984 Jobs |
iP2700, 2702, MP240, MP250, MP252, MP260, MP270, MP272, MP280, MP282, MP490, MP492, MP495, MP499, MX320, MX330, MX340, MX350, MX360, MX410, MX420
On the American continent would cartridges Canon PG-210 ink, so use the same procedure to fill.
We need a syringe, pigmented black ink (if you can not get this OK), an area where you can put a cartridge and there is no problem spilling some ink, a little patience and napkins to wipe up any spills.
Step No. 1 - Remove the top label of the cartridge (which is the number of the cartridge)
It is recommended to remove the label and put in a place where not damage the glue in this way can paste it back into the printer again and prevent more air than necessary for the holes in the cartridge.
label removing the cartridge Canon PG-510 black |
Step No. 2 - Put ink into the syringe and then the ink cartridge
You must fill the syringe with at least 8 ml of ink if the cartridge is standard, and 15ml ink cartridge if the version is extra large (XL).
Deliver ink through the hole will be right in the center, after removing the label will require a bit of pressure to the syringe from the cartridge, in the same way to supply the ink, but we must do it until the vote ink cartridge bottom, means by the printhead.
The ink must provide very slow, this way the ink cartridge absolve all in your sponge is recommended after supplying the ink, letting the cartridge sit for a moment, until the ink is considered stable in this. You may want to know what an ink cartridge inside of it, follow the link...
Step No. 3 - Put the cartridge into the printer, and then head cleaning
Put the cartridge label again and the cartridge into the printer, then it is recommended to print a test page, if the quality is not the best perform a head cleaning thoroughly, this will help the ink drops to head printing.
In case of any question or suggestion, just write a comment in this publication, we will gladly help you.
COMMENTS