As filling Brother toner cartridge and how to make the printer recognize the cartridge as new, follow the steps and if you have any questions, type a comment.
These toner cartridges Brother print around 3,000 pages and accompanied by the cylinder unit.
The printing cost per page is very cost effective compared to other printers as these toner cartridges do not reach very high prices when buying new original or generic and if you still need to save more have the option of filling toner, which which it is explained below.
Tools required:
Blade or cutter and 250g for the model compatible toner powder to refill.
To proceed to take the toner refilling and we remove the white semitransparent plastic cap using the blade or cutter that is located on the right end of toner, as shown in the following figure: the red arrow indicates as removing the cap has delicately to not cause damage.
It continues pulling the remains of powder containing toner to empty the new toner powder into the hole.
This picture indicates the correct position and type of powder container with proper nozzle to avoid leaks of dust.
It must take into account that it is desirable gently shake the dust container before emptying. Finally put the plug back in place and check for any dust have around.
The second phase of filling such toner is that the mechanical reset is positioned at the other end of the toner as shown in the following figure: proper position of the toner to remove the screws and cover.
After removing all the screws, remove the black cover gently so as not to move any piece and set ourselves well like this all the gears in place, then using the following image: rotary gear. it works by gently rotating each print.
The printing cost per page is very cost effective compared to other printers as these toner cartridges do not reach very high prices when buying new original or generic and if you still need to save more have the option of filling toner, which which it is explained below.
Tools required:
Blade or cutter and 250g for the model compatible toner powder to refill.
To proceed to take the toner refilling and we remove the white semitransparent plastic cap using the blade or cutter that is located on the right end of toner, as shown in the following figure: the red arrow indicates as removing the cap has delicately to not cause damage.
![]() |
remove the cap |
This picture indicates the correct position and type of powder container with proper nozzle to avoid leaks of dust.
![]() |
put the toner powder |
The second phase of filling such toner is that the mechanical reset is positioned at the other end of the toner as shown in the following figure: proper position of the toner to remove the screws and cover.
![]() |
screw must be removed |
![]() |
moving piece important!!! |
Proceed to put the rotary gear identical fashion to photography. They turn the screws in place and you can use as usual.
COMMENTS