Follow the steps in this post to eliminate the 5200 error code on the Canon MX320 printer.
The 5200 error code appears on the Canon printer when the cartridge's temperature increase. There might be many reasons for this increase, the first one is your ink cartridge is out of ink or the ink cartridge has the cartridge head covered with ink.
This situation is normal for printers with this kind of ink installment when you are making impressions the ink goes through the hoses and can be easily dispatched to cover the cartridge head. Despite this error, the Canon MX320 is indeed a very good printer with high performance.
After refilling the cartridge leave it to rest for about 5 minutes to allow the ink to spread and the inner sponge to soak it. Disconnect the printer and check if both the cartridge and the printer are clean.
Then put the cartridge back to the printer, if the error persists press and let down for at least 15 seconds the STOP/ RESET button until the printer is reset and resume printing. If you have correctly refilled the cartridge the error should disappear.
If you have any question, please contact us by leaving a comment is the section below this post and we will be glad to get back to you.
This situation is normal for printers with this kind of ink installment when you are making impressions the ink goes through the hoses and can be easily dispatched to cover the cartridge head. Despite this error, the Canon MX320 is indeed a very good printer with high performance.
Here are the instructions to remove this error:
We have created a separate post to show you how to refill the Canon 210 black and tricolor ink cartridges, these are the cartridge use for this printer. As we mentioned early, the cartridge temperature increase when the cartridge is out of ink, therefore refilling the ink cartridge and cleaning the cartridge connector will eliminate the error IF the cartridge is not already damaged.
After refilling the cartridge leave it to rest for about 5 minutes to allow the ink to spread and the inner sponge to soak it. Disconnect the printer and check if both the cartridge and the printer are clean.
Then put the cartridge back to the printer, if the error persists press and let down for at least 15 seconds the STOP/ RESET button until the printer is reset and resume printing. If you have correctly refilled the cartridge the error should disappear.
If you have any question, please contact us by leaving a comment is the section below this post and we will be glad to get back to you.
COMMENTS