Process for reset the printer Epson Stylus TX133

Learn you to has reset the Epson Stylus TX133 printer, following the steps below.

It is the best multifunction printer of its kind, with DURABrite Ultra inks and Epson individual cartridges to save at the time of purchase supplies. Scanner 48 bit and up to 1200 dpi, print paper sizes Letter, Occupation (21,6 x 35,6cm), A4, B5, A5, A6, report, executive, statement, user-defined: (8, 9 to 21.6 cm) x (8.9 to 111,7cm) Envelopes: No. 10, DL, C6 and it is compatible with Windows® 7, Windows Vista®, Windows XP, Windows XP Professional x64 Mac OS operating systems ® X 10.4.11, 10.5.8 - 10.6.x.
Something we have to be very aware when we are doing a reset of this and any other Epson printer is that we cannot have any other printer connected.

The printer has to be on and running. Both the computer and the printer have to be running perfectly.

We need to download a program to perform the reset on this printer download the program by visiting the following link:

Pay by PayPal...
Download here the reset for Epson Stylus TX133

Process for reset the printer Epson Stylus TX133

Step No.1

When we download the file we will see that this is compressed, we just have to perform a decompression and to do this we need a program, we recommend using Winrar, to know how to make a decompression see the following instructions on how to unzip a document. view Image...

we click Extract here and a folder will appear

Step No. 2

Then we have the decompressed file we double click on the program file that has the following image. It is necessary to run this file and we can do it by double clicking on right bottom and running the file.

Step No. 3

A message appears saying that this program is free just click on "accept".

Step No. 4

In the next step we have to select the option "Select" on the top right. see image...

click on select

Step No. 5

Next the window that lets you select the port to which the printer is connected appears in this we select the "Auto Select" option and click on OK. see image below...

we leave the port in Auto selection mode

Step No. 6

In Model Name will appear the name of reset we are trying to install, and then the "Destination" we leave it as shown and in the port we leave the default option in this case is "Auto Selection". See the previous image, if you have a question make a comment.

After we click OK, the window disappears where we selected Auto selection, and the main program window will stay in this moment we have to select the option Particular Adjustment Mode. view image...

particular adjustment mode

Step No. 7

In this step we have to be very careful, if we select any other option it can be fatal to our printer, even we can delete the configuration of our printer forever, it is recommended to only select the option that we will tell you.

The option that we have to select is called Waste Ink Pad Counter and we click on OK to continue.

This will restore the printer to tell there is no ink any longer even if this is done we have to know that the residues are full, though perhaps the printer come to think this by the number of pages that have been printed with it, but in reality can cause problems over time.

just click waste ink pad counter

After selecting this option, click on OK.

Step No. 8

Now we select the options that appear to select, after that we click on CHECK to verify that everything is okay, we click on SET, then we click on initialization and then when this process is complete we click on FINISH. After this whole process we turn the printer off.

We wait for about 30 seconds and turn it on again, so we have resumed the page counter which used to tell us that our printer had the ink tanks filled. see image...

procedure: read the information first

If the results achieved in this post are not what you want to contact us through a comment in this publication we will gladly respond. see important information below...

It is important for you to download the printer drivers for Windows XP / Vista / 7, get free manual for this printer (html) with this we can read printer factory specifications.