Learn how refill youself the Samsung ML-210 toner, with the next steps and security protection now.
With the Samsung ML-210 toner we can print approximately 2,500 pages fill it though, this toner cleaning if we can fill approximately 3 times, have pending we have to use to fill this toner powder compatible with Samsung.
Use the right tools for this process, these include gloves to eliminate contact with the powder filling, and the mask to prevent dust from entering our body through the respiratory tract, do not touch the cylinder (this is the green sky) any scratches may appear on the pages when printing. Here is what you need:
The procedure for filling a toner is almost the same for all toner, need a lot of concentration and determination to avoid leaving any part of misplaced toner.
As you do all procedures should be watching where each piece will have to put these in the same place when finished, if necessary are advised to take all fence as disarming the piece.
Keep toner powder on clothing or skin, this is difficult to remove, if you do not have much experience or see is not going as it should save all the parts and get help from someone with more knowledge over the area.
Step #1
Place the toner on a flat surface easy to clean, in case you have a flat or easily cleanable use a bit of fabric that will not need in the future, try to make the process slower and clean as possible.
Step #2
The next thing you do is disassemble the toner it is necessary to remove several screws phillips side of the toner, as shown in the following image.
Step #3
When we removed the screw marked in red and the screw that is next below the upper connector let go that part of the toner.
Do it carefully just have to pull outside and check how this all again when you put this cover everything is as it must be to avoid paper jams because of toner. view image...
Step No. 4
After removing the cover from the right side of the toner, we will see a small plug, remove the cap with the screwdriver to plas slots and we can supply the 150 grams of powdered toner Samsung, this will do slowly and carefully to avoid spilling powder.
It's where we have to use the mask to prevent this from penetrating our body through the respiratory tract, when we finish supplying toner powder in the toner put the cap and place the cover.
Step No. 5
After filling and put the toner in our printer, try to print multiple pages of evidence if these do not work out or printer says that the toner is empty we must choose to change the chip, they got them at any store refilling cartridges and toner search the Internet in your country and contact with dealers, tell the model and if necessary ask if for many pages is supported.
Toner can not fill more than twice without having to clean the toner reservoir search the printer settings to see if you have the option of performing cleaning toner.
Use the right tools for this process, these include gloves to eliminate contact with the powder filling, and the mask to prevent dust from entering our body through the respiratory tract, do not touch the cylinder (this is the green sky) any scratches may appear on the pages when printing. Here is what you need:
- 150 grams of powder to refill toner Samsung
- Phillips screwdriver (screw-shaped cross)
- Straight slot screwdriver (conventional screwdriver).
- Mask to prevent dust access to our body
- Flat or easy to clean surface
- Water and soap to wash our hands afterwards
The procedure for filling a toner is almost the same for all toner, need a lot of concentration and determination to avoid leaving any part of misplaced toner.
As you do all procedures should be watching where each piece will have to put these in the same place when finished, if necessary are advised to take all fence as disarming the piece.
Keep toner powder on clothing or skin, this is difficult to remove, if you do not have much experience or see is not going as it should save all the parts and get help from someone with more knowledge over the area.
Step #1
Place the toner on a flat surface easy to clean, in case you have a flat or easily cleanable use a bit of fabric that will not need in the future, try to make the process slower and clean as possible.
Step #2
The next thing you do is disassemble the toner it is necessary to remove several screws phillips side of the toner, as shown in the following image.
 |
| remove screw toner samsung ml-210 |
When we removed the screw marked in red and the screw that is next below the upper connector let go that part of the toner.
Do it carefully just have to pull outside and check how this all again when you put this cover everything is as it must be to avoid paper jams because of toner. view image...
 |
| remove lid toner samsung ml-210 |
After removing the cover from the right side of the toner, we will see a small plug, remove the cap with the screwdriver to plas slots and we can supply the 150 grams of powdered toner Samsung, this will do slowly and carefully to avoid spilling powder.
It's where we have to use the mask to prevent this from penetrating our body through the respiratory tract, when we finish supplying toner powder in the toner put the cap and place the cover.
 |
| remove plug to supply toner powder |
After filling and put the toner in our printer, try to print multiple pages of evidence if these do not work out or printer says that the toner is empty we must choose to change the chip, they got them at any store refilling cartridges and toner search the Internet in your country and contact with dealers, tell the model and if necessary ask if for many pages is supported.
Toner can not fill more than twice without having to clean the toner reservoir search the printer settings to see if you have the option of performing cleaning toner.
COMMENTS