Here is a list of the most popular errors on Konica-Minolta printers.
The Konica-Minolta printer is a color laser printer mostly use by graphic designers. In this post, we will show you a list of the most common error of this printer, if you receive this error code try to apply the solutions given here and if it does not work, please contact the technical support for further assistance.
Errors list
Display Message | Message Meaning | Solution |
Close printer covers | The printer cover is open. | Close the printer covers. |
Paperless - paper refill | No paper. | Load paper in the input tray. |
Paper jam - Remove paper | The paper has jammed near the inbox. | Remove the paper jam. |
Paper Jam NB 2 - Remove Paper | Paper is jammed in the center of the machine. | Open the front panel and remove the paper jam. |
Paper jam NB3 - Remove Paper | The paper has jammed near the output tray. | Remove the paper jam. |
Check the printer: 01 - Device Reset | The fuser temperature is too high. | Allow the printer to cool down and try printing again. If it is still overheating, adjust the fuser temperature if possible. |
Check the printer: 02 - Device Reset | The fuser temperature is too low. | Adjust the temperature of the printer fuser if possible. If not, please contact technical support. |
Check the printer: 04 - Device Reset | There is an error with the engine. | Please contact technical support. |
Check the printer: 05 - Device Reset | The laser is not properly aligned or synchronized. | Please contact technical support. |
Paper Size - Paper Replace | The paper size does not match the configuration. | Change the print settings or paper type. |
Calefacción - Please Wait | The printer is warming up. | Wait for the printer to finish warming. |
Insert Toner - Toner Low | The toner cartridge is running low on toner. | Remove and shake the cartridge to redistribute the toner or replace Konica-Minolta toner cartridge if still not working correctly. |
22 Lift the main tray | The media tray is overloaded. | Remove some of the media in the media tray. |
16 Forward Rot Belt | The transfer belt is rotating during print jobs. | Make sure the transfer belt moves during printing. If you are locked into place, contact technical support. |
Some of these errors are easy to solve, but if it is too complicated for you please contact the technical support to avoid damaging your printer.
COMMENTS