How to scan printers Epson L200

Learn how scan used the printer Epson L200, direct and without you computer.

The Epson L200 printers have come to respect, all thanks to its new printer continuous ink system, this printer and its useful lifetime is about fifteen thousand printed copies it is working wonderfully by the way it can reset the error tank full ink when it arrives at fifteen thousand copies, even you can use generic ink and enter the codes reset ink pots for this printer.

With these printers we can perform a scan both black and color, for this it only needs to have a complete driver installation. To do we will explain the simple process of scanning with these printers.

• What we do first is to have the printer connected to a computer, both devices fully functional, as you know the digitization of documents makes a stored in the computer and it is necessary to have the computer and printer fully operational.
• Before performing a scan and if we want that everything works well we need to put the original document on the top glass, if you do not know how to put a document as indicated see picture below, note that you must check the signal in the printer on one side of the glass. view image...

place image as shown in the picture

• When we have the image placed on the scanner glass to begin, we must press both copy buttons simultaneously, as we know on the front panel there is a button to make black copies and another button to make colored copies these are the buttons you have to press at the same time.

press two buttons at once

As it appears in the image, we must press these two buttons simultaneously; the printer will immediately recognize that it has been ordered to start scanning.