Refill youself the ink cartridge Canon PG-30 black with the next steps, say a coment if you have problem.
This ink cartridge yields for around 320 pages again and when we fill this cartridge will get a yield of approximately 200 pages, for this cartridge have to use the amount of 20ml of ink and we use the ink you get in stores computers, you must use a syringe ink not used for another color.
This ink cartridge is compatible with the following printers’ iP1600 / iP2200 / iP1200 / iP1300 / iP1700 / MP150 / MP160 / MP170 / MP180 / MP410 / MP450 / MP460. The procedure for filling is simple but we have to follow the procedure as raised below, in case you need help please contact us.
Before filling any ink we must know that ink is a bit difficult to remove you can see the process we have proposed to remove it from our skin, it can also prevent this from happening by putting the ink cartridge in an area which does not matter that ink is spilled or also preferably using a piece of black cloth. See procedure below...
We always recommend removing the label cartridges have on top, place the label in a safe place to keep the sticker to put it back after filling the cartridge.
If you want you can fill the cartridge by a hole just below the label that has the indication of the cartridge number and you can fill it by making a perforation just below the tag as shown in the image below.
For the type of filling that occurs above in the image it is necessary to use a drill bit as shown in the picture, if you want to fill it under the label you have to use a syringe and push hard gently turning the syringe.
We supply the amount of ink as stated above do it gently and firmly, it is possible that the ink comes out the bottom.
After filling the ink cartridge is recommended to leave this about 5 minutes out of the printer, when we put this to the printer you can make a cleaning head to the printer and if you want you can print a page or several test pages.
This ink cartridge is compatible with the following printers’ iP1600 / iP2200 / iP1200 / iP1300 / iP1700 / MP150 / MP160 / MP170 / MP180 / MP410 / MP450 / MP460. The procedure for filling is simple but we have to follow the procedure as raised below, in case you need help please contact us.
Before filling any ink we must know that ink is a bit difficult to remove you can see the process we have proposed to remove it from our skin, it can also prevent this from happening by putting the ink cartridge in an area which does not matter that ink is spilled or also preferably using a piece of black cloth. See procedure below...
We always recommend removing the label cartridges have on top, place the label in a safe place to keep the sticker to put it back after filling the cartridge.
If you want you can fill the cartridge by a hole just below the label that has the indication of the cartridge number and you can fill it by making a perforation just below the tag as shown in the image below.
 |
| drill cartridge canon |
We supply the amount of ink as stated above do it gently and firmly, it is possible that the ink comes out the bottom.
 |
| supplying the ink slowly |
COMMENTS