Reset the transfer kit and fuser for 3500, 4500, 4600, 8500, 8550 HP color laserjet

Reset the transfer kit and fuser for 3500, 4500, 4600, 8500, 8550 HP color laserjet self in home, no need tecnical support.

Reset the transfer Kit:

These processes are really simple, there is no need of combination or anything like that, most cases printers have this setup on their menu.

• To reset the transfer kit in 4500-4550 LaserJet, press the Menu button until the “RE ESTABLISHMENTS” option appears.
• Select this option and keep on pressing this button until the “Reestablish transfer kit” option appears. Select this option and that’s it.

Reset the fuser kit:

• Press the Menu button until the “RE ESTABLISHMENTS” option appears.
• Look for the “Reset the fuser kit” option.
• Select this option, then accept and that’s it.

To reset the 4600 HP Color LaserJet (Reset the Image transfer kit (ETB))

• Always, after cleaning the roller of the printer, since it is allowed, a message indicating that a new roller has been placed is shown. When this happens, down through the options and press to select "YES".
• Next step is to press the check button to reset the unit by using the Setup option in the menu.
• An option asking if a new roller or image transfer kit has been placed will be displayed, select “YES”
• Select "RESET SUPPLY"

To reset the 8500-8550 HP Color LaserJet (Reset the transfer kit or roller)

• Press the Menu button until the “RE ESTABLISHMENTS” option appears.
• When in the “RE ESTABLISHMENTS” option, look for “Reset the unit life counter” option. It is possible that this last option appears with a different name.
• When in the “Reset the unit life counter” option, select Accept. Everything must be right and the machine ready.

Reset the fuser unit:

• Press the Menu button until the “RE ESTABLISHMENTS” option appears.
• When in the “RE ESTABLISHMENTS” option, look for FUSER LIFE option
• Press SELECT o SELECT TO RESTORE
• Press Ready. Names can changes due to language.