This post will teach you how to refill the Hp 98 black ink cartridge.
The HP 98 ink cartridges are very simple to refill if you correctly follow the steps, this cartridge yields up to 420 pages when it is brand new and 350 pages after being refilled and is compatible with the following printers:
OfficeJet 150 Mobile, Officejet 6310, Photosmart 2573, Photosmart 2575 Series, Photosmart C4180, Deskjet 5940 Series, Deskjet D4160, Officejet 100 Mobile Printer - L411a, Officejet H470 Series, Deskjet 5940 Series, Deskjet D4160, Officejet 6310, Photosmart 2573, Photosmart 2575 Series, Photosmart C4180, Photosmart D5069, Photosmart D5160, Officejet H470 Series
Step No. 1
Please place the ink cartridge on a flat surface where you can easily refill it, we recommend a surface with a dark color or you can simply put an old piece of fabric to protect the surface from ink leaks.
Step No. 2
Slowly remove the sticky label, the one with the color and cartridge number. We always advised removing this label before starting the refilling process, to allow the necessary airflow to give the best print quality. Do not discard the label because at the end of the procedure you will need to put it back.
Step No. 3
Slowly inject 15 ml of ink into the cartridge, you must do it very slowly to allow the inner sponges to soak all the ink.
Step No. 4
After refilling the cartridge, you will need to put the sticky label back to the cartridge and print a test sheet to check if everything is working well. To learn how to print a test page, click the following link
How to print a test sheet for a black ink cartridge.
If after filling up the cartridge it continues having problems or flashings, try the following steps
OfficeJet 150 Mobile, Officejet 6310, Photosmart 2573, Photosmart 2575 Series, Photosmart C4180, Deskjet 5940 Series, Deskjet D4160, Officejet 100 Mobile Printer - L411a, Officejet H470 Series, Deskjet 5940 Series, Deskjet D4160, Officejet 6310, Photosmart 2573, Photosmart 2575 Series, Photosmart C4180, Photosmart D5069, Photosmart D5160, Officejet H470 Series
Instruction to refill the HP black ink cartridge:
It recommended cleaning the cartridge connectors before starting the refilling process, especially if you have used this cartridge for a long period of time it might be covered with dry ink.
Step No. 1
Please place the ink cartridge on a flat surface where you can easily refill it, we recommend a surface with a dark color or you can simply put an old piece of fabric to protect the surface from ink leaks.
Step No. 2
Slowly remove the sticky label, the one with the color and cartridge number. We always advised removing this label before starting the refilling process, to allow the necessary airflow to give the best print quality. Do not discard the label because at the end of the procedure you will need to put it back.
Hp 98 black ink cartridge |
Step No. 3
Slowly inject 15 ml of ink into the cartridge, you must do it very slowly to allow the inner sponges to soak all the ink.
Syringe |
After refilling the cartridge, you will need to put the sticky label back to the cartridge and print a test sheet to check if everything is working well. To learn how to print a test page, click the following link
How to print a test sheet for a black ink cartridge.
If after filling up the cartridge it continues having problems or flashings, try the following steps
- Remove the ink cartridge and clean the connectors with some wet napkin.
- Clean the printer connectors as well.
- If there is still no solution, turn the printer off and unplug it from the power supply for about 10 minutes and then plug it again and place the cartridge
- If there is no change, please contact us by leaving a comment below.
COMMENTS