This post deals with a few frequent error messages on Canon MFP printers, tells you what they mean and how to fix them.
In this post, we will talk about the most used restoring codes for printers, you might able to find the solution for the error you have been dealing with on your Canon printer in the following the chart.
If you are unable to find a restoring code for your printer, please leave a comment below and if you help to solve one of these errors on your printer also comment below we will get back to you as soon as possible.
These error codes for Canon MFP MP140, MP150, MP160, MP190, MP210, and MP220 will not delete your information on the printer. The LED will blink in a yellow-green color, with long green blinks in the middle.
If you are unable to find a restoring code for your printer, please leave a comment below and if you help to solve one of these errors on your printer also comment below we will get back to you as soon as possible.
These error codes for Canon MFP MP140, MP150, MP160, MP190, MP210, and MP220 will not delete your information on the printer. The LED will blink in a yellow-green color, with long green blinks in the middle.
Error
|
Number displayed on screen
|
error code
|
Meaning
|
Solution
|
Additional notes
|
E22
|
2
|
5100
|
Ink cartridge carriage error: this is an ink cartridge carriage movement error
|
Repair the unit
| |
E23
|
3
|
6000
|
LF error: an error has occurred during the paper feed
|
Repair the unit
| |
E24
|
4
|
5C00
|
Unit purge error: an error has occurred in the cleaning unit
|
Repair the unit
| |
E25
|
5
|
5700
|
ASF error de leva sensor
|
Repair the unit
| |
E26
|
6
|
5400
|
Abnormal temperature rise: the printer is overheating
|
Repair the unit
|
the sensor temperature is located on the MFP board carriage
|
E27
|
7
|
5B00
|
The ink waste absorbers are full or overflowing
|
Service
|
To restore the MP10 data buffer program, you will need a tool that’s not available to the general public
|
E28
|
8
|
5200
|
Abnormal temperature rise: the ink cartridges are overheating
|
Get a diagnosis
| |
E29
|
9
|
6800
|
EEPROM error
|
Repair the unit
|
In most cases, this could mean the control board is defective
|
E32
|
12
|
6A00
|
AP error de posición
| ||
E33
|
13
|
6B00
|
Position error in the paper feed
|
Repair the unit
| |
E35
|
15
|
9000
|
Host USB Ubas sobrecorriente
|
Repair the unit
|
In most cases, this could mean the control board is defective
|
E37
|
17
|
6D00
|
Error in the conductor unit’s engine
|
Repair the unit
| |
E40
|
20
|
6500
|
Other Hardware Error
|
Repair the unit
|
Failure that the printer with self-diagnostics cannot be determined with an accuracy of one node/block
Most of the time, this error is defective power supply or control card |
E42
|
22
|
5010
|
An error has occurred in the scanner unit
|
Repair the unit
| |
Constant blinking on your printer
|
ROM error
|
Repair the unit
|
The control board is damaged
| ||
The constant blinking is now yellow
|
RAM error
|
Repair the unit
|
The control board is damaged
|
COMMENTS