How to unclog injectors cartridge from home

Look no further, this post will help you to successfully open an ink cartridge from the comfort of your own home.

Refilling the cartridges numerous times will clog them, in this post, I will show you how to unclog them from the comfort of your home in the simplest way possible.

After refilling the cartridge several times, they accumulate a considerable amount of unused ink stored in the sponges, especially the cartridges from Hp, Canon, and Lexmark they are the ones with sponges. In the next paragraph, I will show you the process to eliminate the ink accumulates inside the cartridge.

hp ink cartridge refill process

The steps below to unclog your cartridges are very simple, you do not need to procrastinate. Therefore, before starting, make sure you read and understand the steps, also the ink cartridge must be cleaned.

       Instructions:

1. Put the cartridge in some water not too cold nor too hot i.e. steam boiled water.
2. Please note that the cartridges cannot under any circumstances exceed the limit of connectors i.e. water cannot clog up the connectors in the front of the cartridge.
3. Leave the cartridge for approximately 20 minutes until the vapor penetrates the head.
4. Remove the cartridge from the water without cleaning the part that was in the water. Shake the cartridge to allow the water and the ink to come out of the ink cartridge.
5. After doing these steps and realizing that the cartridge is not completely unclogged, repeat the steps from the beginning, but make sure to change the water to see the amount of ink coming out of the cartridges.

If you accidentally spill some ink into your close or skin, read the post about how to remove the ink from the clothes and skin. Please contact us if you need further assistance or have any questions thank you.